Admixture/Additives for Lightweight EPS Cement Wall Panels

EPS Panel

Lightweight EPS Cement Sanwich Panel

EPS cement wall panel has features of light weight, high intensity, thin, waterproof and fire proof, heat preservation, sound insulation, shockproof, low cost and space-saving. It is widely applied to interior wall partition, exterior wall and roof for all kind of constructions.

Additive for Core Material

The special model of cellulose ether (HPMC) and latex powder (RDP) from MICHEM are aimed at the field of new light-weight wall panels. Compound use of them (as additives) can significantly enhance the processability of extruded light-weight wall panels.

EPS cement sandwich panel is a kind of light weight energy saving wall material with reinforced calcium silicate board as surface panel, cement, EPS, fly ash as core material and forming by one time compound.

EPS cement sandwich wall panel is a green, new kind of product. It can be used as partitions for high buildings and both external wall and partitions for steel-structure prefab houses, villas. Its birth took the place of traditional red bricks and AAC blocks; it can fully meet the requirements of modern buildings to walls.

EPS cement sandwich wall panel has the advantages of lightweight, thin thickness, high-strength, heat and sound insulation, water and moisture proof, anti-seismic, thermal insulation, etc. Meanwhile, it can be nailed, sawed, grooved, and easy for installation on the construction site. It can reduce the loading weight of the building and increase usable space, so it can save a lot of construction cost.

 Lightweight EPS cement sandwich wall panels are manufactured from EPS (expanded polystyrene and gases), 42.5# cement, sand and additives.

The special model of cellulose ether (HPMC) and latex powder (RDP) from MICHEM are aimed at the field of new light-weight wall panels. Compound use of them (as additives) can significantly enhance the processability of extruded light-weight wall panels, so that it has higher bonding strength and lubricity. And improve the wet strength of the mortar and the adhesion of the panel after extrusion. It is the first choice for ordinary light-weight wall panel and composite light-weight wall panel enterprises.


Post time: Jun-10-2020